Hebei Anmei Electrical Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of ansi lv porcelain transformer bushing in China, also supports customized service. If you're going to buy high quality ansi lv porcelain transformer bushing made in China, welcome to get quotation from our factory.
product Introduction

The ANSI low voltage porcelain bushing is the secondary-side outlet of oil-immersed distribution transformers built to North American practice, mounted on the tank cover or side wall and rated 1.2kV. In the ANSI system this porcelain transformer bushing is treated as a standardized interface component rather than a custom part: flange diameter, bolt circle, stud thread and terminal height follow a fixed dimensional convention, which is why an ANSI porcelain bushing supplied today still fits a tank machined decades ago. For utilities and repair workshops specifying a low voltage bushing for distribution transformer replacement work, this dimensional stability is often valued above any single electrical rating, because it removes re-machining, adapter plates and cable-lug changes from the outage plan.
The insulation body of the 1.2kV porcelain bushing is high-alumina electrical porcelain, wet-formed and fired at high temperature until the body densifies into a glass-bonded crystalline structure. As an electrical porcelain bushing, its three governing properties are mechanical strength to resist mounting torque and cable pull, low open porosity so that oil does not penetrate the body, and a glazed surface that limits moisture absorption outdoors. On the low-voltage side a low voltage transformer bushing carries large current at modest voltage stress, so the conductive stud - copper or aluminum, threaded at both ends - is sized by current class rather than by insulation thickness. The porcelain bushing insulator therefore works as a current-carrying interface: contact tightness, conductor cross-section and the heat path through the machined base determine service life more than creepage length does.

Applications
1. Distribution Transformers
Low-voltage side outlet of oil-immersed distribution transformers built to ANSI practice.
2. Pole-Mounted and Pad-Mounted Units
Transformers installed on poles, in pad-mounted enclosures and compact substations.
3. Replacement and Repair
Direct substitution of existing 1.2kV bushings during maintenance or refurbishment.
4. Industrial and Commercial Distribution
Factory, commercial building and data-centre distribution transformers with high secondary current.
5. Renewable Energy Low-Voltage Side
Low-voltage side of step-up transformers in wind, PV and storage projects using ANSI equipment.
Technical Parameters Table
| Item | Specification |
|---|---|
| Product | ANSI Low Voltage Porcelain Bushing |
| Rated Voltage | 1.2kV |
| Current Classes | 63A – 1227A (multiple classes) |
| Insulation | High-alumina electrical porcelain, glazed |
| Conductive Stud | Copper, threaded both ends |
| Mounting | Flange or threaded base, ANSI layout |
| Sealing | Oil-resistant gasket at tank interface |
| Medium | Transformer oil |
| Standard Basis | ANSI dimensional system |
| Routine Tests | Dielectric loss, porosity, power-frequency withstand voltage, DC low resistance, helium leak |
| Customization | Current class, stud thread, mounting size per drawing |
| Packing | Individual box with padding, export carton or crate |

Frequently Asked Questions
Q1. What does 1.2kV mean for this bushing?
It is the rated voltage class of the low-voltage side in ANSI practice, not the system voltage. The bushing is designed for the secondary winding potential, so its insulation thickness is modest while its current-carrying capacity is the main design driver.
Q2. How do I choose among 63A and 1227A?
Selection follows the transformer secondary current, with margin for continuous loading. Provide the rated secondary current and the cable lug type, and we confirm the current class and stud thread together.
Q3. Can it replace an existing bushing directly?
Yes, provided the opening diameter, bolt pattern and stud thread match the ANSI drawing. Send the old bushing dimensions or a photo with a ruler, and we will confirm the equivalent model.
Q4. Should I choose porcelain or resin for the low-voltage side?
Porcelain offers proven mechanical strength and stable dielectric behaviour under long oil immersion; resin offers lighter weight and design freedom. For standard ANSI openings and replacement work, porcelain is usually the more direct match.
Q5. How is the seal achieved and how is it checked?
An oil-resistant gasket is compressed between the bushing base and the tank cover by the mounting nut. Each unit is helium leak tested before delivery to verify sealing.
Q6. What tightening torque should be used?
Torque is specified per model and gasket type and should be followed to avoid under-sealing or cracking the porcelain. The value is confirmed in the installation sheet supplied with the order.
Q7. Are test reports available?
Routine test records - dielectric loss, porosity, power-frequency withstand voltage, DC low resistance and helium leak - can be provided per batch on request.
Q8. Does it suit high-current transformers above 1000A?
Yes. The 1227A class is intended for large secondary currents; the limiting factor is contact heating, so the stud thread must match the lug and be tightened correctly.
Q9. Can dimensions be customized?
Current class, stud thread, mounting dimension and terminal form can be produced to drawing, with a minimum order quantity confirmed per case.
Q10. How are they packed for export?
Individually boxed with protective padding, then packed in export cartons or crates; fragile ceramic items are marked and stacked per carton limits to reduce transit breakage.
01
Rapid Response
Every inquiry is answered online within 24 hours, with pricing and lead-time information updated promptly.
02
Technical Advisory
Professional answers on voltage class, mounting methods and test requirements help avoid selection errors.
03
Documentation Support
Test reports, packing lists and other export documents are supplied with shipment for customs clearance and acceptance.
04
After-Sales Follow-up
After delivery we keep tracking product performance and respond promptly to any parameter or installation question.
Company Introduction
Hebei Anmei Electric Equipment Co., Ltd. is a manufacturer of transformer bushings and accessories for the global power industry, located in Hejian, Hebei Province, China. Founded in 2014 and built on more than 30 years of industry heritage, the company integrates R&D, production and sales in its own factory, completing the full chain from porcelain forming and firing to metal part machining, assembly and testing in-house.
The product range covers high and low voltage bushings for oil-immersed transformers up to 40.5kV, in three insulation forms - high-density porcelain, vacuum-cast epoxy resin and high-temperature vulcanized silicone rubber - and is manufactured to the ANSI, DIN, EN, AS and NBR dimensional systems. Alongside bushings, the company supplies oil level gauges, silica gel dehydrating breathers, pressure relief valves, butterfly valves and terminal shrouds, allowing transformer manufacturers and utilities to source the complete insulation and accessory set from one supplier.
Quality control runs from incoming material acceptance through process control to routine testing of every finished bushing - dielectric loss, porosity, power-frequency withstand voltage, DC low resistance and helium leak detection - and the management system certifications cover quality, environment, occupational health and safety and energy management. Custom production to drawing, sample processing and OEM cooperation are supported.
Engineering and Manufacturing Team
An in-house engineering and production team covering porcelain process, resin casting, metal machining and electrical testing. Technical selection support is provided before order confirmation - voltage class, rated current, standard system and mounting dimensions are checked against the customer's transformer design, so the delivered bushing matches the tank opening without adapters.
Fast Response and Reliable Delivery
Quotations, drawings and technical answers are handled directly by the production side, with short communication paths from inquiry to shipment. Batch production is scheduled in-house, urgent requirements can be arranged after drawing confirmation, and bushing orders can be consolidated with accessories in one shipment, reducing the number of suppliers and shipments a transformer maker has to manage.

40.5kV
Maximum voltage class of the bushing range
2000+
Daily Bushing Production Capacity
30+
Patent Certificates
30+
Countries
Hot Tags: ansi lv porcelain transformer bushing, China ansi lv porcelain transformer bushing manufacturers, suppliers, factory
