Hebei Anmei Electrical Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of discharge-gap type surge arrester bushing in China, also supports customized service. If you're going to buy high quality discharge-gap type surge arrester bushing made in China, welcome to get quotation from our factory.

In modern transformer manufacturing, every inch of clearance counts. This Integrated Lightning Arrester Transformer Bushing completely eliminates the need for bulky external surge arresters and complex connecting cables. By integrating the discharge gap directly into the porcelain bushing, it significantly reduces the overall height and footprint of the Power Transformer. For OEMs and EPC contractors, this Space-Saving Surge Protection Bushing drastically streamlines the assembly process, reduces the Bill of Materials (BOM), and lowers total installation costs. Moreover, this integrated architecture eliminates the risks of external wire fatigue and wind-induced sway, maximizing mechanical stability for overhead installations.
When lightning strikes or switching overvoltages occur, the energy must be dissipated instantly. This Discharge Gap Bushing is engineered with a precisely calibrated arcing gap (or ZnO varistor core). The high-strength ceramic housing safely contains the arc, routing the massive surge current directly to the grounded tank without damaging the internal transformer windings. It acts as an ultimate shield for Oil-Immersed Distribution Transformers in high-lightning-density regions. Crucially, the advanced hermetic sealing system of this bushing prevents moisture ingress into the internal gap, guaranteeing long-term thermal stability and reliable overvoltage protection over decades of service.

Products Description
| Parameter | Specifications |
|---|---|
| Product Name | Integrated Lightning Arrester Transformer Bushing |
| Applicable Standard | IEC 60137 / IEC 60099-4 |
| Rated Voltage | 10kV - 35kV (Customizable) |
| Continuous Operating Voltage (MCOV) | 12kV - 24kV |
| Rated Current (Continuous) | 200A - 315A |
| Nominal Discharge Current | 5 kA / 10 kA (8/20 μs) |
| Lightning Impulse Residual Voltage | ≤ 75kV |
| Power Frequency Withstand Voltage | 42kV / 65kV / 95kV (1 min) |
| Lightning Impulse Withstand (BIL) | 75kV / 125kV / 185kV |
| Discharge Gap Type | Integrated Arcing Horn / ZnO Varistor Core |
| Insulation Material | High-Density Inorganic Electrical Porcelain |
| Flange Material | Anti-corrosion Cast Iron / Aluminum Alloy |
| Creepage Distance | Customizable (25mm/kV - 31mm/kV) |
| Operating Temperature | -40°C to +105°C |
| Application | Oil-Immersed Transformers, Compact Substations |
【Product Advantages】
Ultimate Space Optimization
By merging the arrester and bushing into one unit, this Discharge Gap Bushing slashes the transformer's overall height. It is the ultimate solution for Compact Substations where clearance is a critical constraint.
Reduced Wiring & Lower Failure Points:
Eliminating external surge arresters and their associated connecting cables reduces potential failure points. This Lightning Arrester Transformer Bushing prevents loose connections, corona discharge, and cable degradation.
High Energy Withstand Capacity:
The integrated gap or varistor core safely absorbs and redirects massive lightning impulse currents. The high-density ceramic housing of this Overvoltage Protection Bushing resists extreme arc heat, ensuring zero structural damage.
Streamlined Inventory & Installation:
Instead of purchasing bushings and arresters separately, OEMs can simply order this Integrated Surge Protection Bushing. It simplifies your supply chain, reduces inventory SKUs, and cuts assembly line labor time by up to 50%.

【Application Scope】
1. Urban Compact Substations & EV Charging Hubs
In highly dense urban areas and EV charging stations, installation space is extremely limited. This Overvoltage Protection Bushing is the perfect solution, providing maximum surge protection without adding vertical height to the transformer, ensuring safe operation in confined spaces.
2. Offshore Wind & Coastal Microgrids
Subject to severe thunderstorms and salt spray, coastal renewable energy grids demand absolute reliability. The dense porcelain and integrated discharge design of this Lightning Arrester Bushingguarantees zero flashover and robust protection against extreme weather events.
3. Pole-Mounted Transformers in Mountainous Regions
For rural electrification in mountainous areas where external arrester maintenance is difficult, this integrated Surge Arrester Bushing eliminates the need for frequent manual inspections of external wiring, ensuring a maintenance-free, highly reliable power supply.
why choose us

Hebei Anmei Electric Equipment Co., Ltd.
Established in 2014 and located in Hebei, China, Hebei Anmei Electric Equipment Co., Ltd. is a dedicated source factory empowering global transformer manufacturers. Rather than just a single-component supplier, we specialize in a comprehensive accessory matrix for Oil-Immersed Transformers, integrating transformer bushings (porcelain, epoxy, silicone rubber), pressure relief valves, dehydrating breathers, and oil level gauges into one reliable supply chain.
Our core value lies in eliminating fragmented procurement and reducing supplier management risks for our clients. Backed by our own modern factory and an agile engineering team, we provide strict end-to-end quality control and highly flexible OEM/ODM customization. From standard DIN/ANSI interchangeable parts to tailor-made solutions, Anmei ensures every component perfectly matches your transformer design, guaranteeing seamless assembly and long-term operational safety.
01
One-to-one Service
Each customer is supported by a dedicated salesperson and engineer working together, ensuring accurate understanding of requirements.
02
Free Selection & Drawing Check
Free selection advice is provided based on transformer parameters, with interfaces and specs checked against drawings for a worry-free order.
03
Sample & Trial Order Support
Sample customization and flexible trial orders are supported, letting customers verify before bulk purchase and reducing cooperation risk.
04
Transparent Progress & After-sales
Production progress is updated in time and after-sales issues are followed up by dedicated staff, with clear communication at every stage.
Products Type

Our product matrix is extensive and highly customizable. We supply high-voltage (up to 40.5kV) and low-voltage bushings in three main insulation materials: porcelain, epoxy resin, and silicone rubber. Additionally, we specialize in custom manufacturing bushings compliant with international standards such as DIN, ANSI, EN, and AS. Furthermore, our comprehensive accessory ecosystem-ranging from oil level gauges and breathers to protective covers-fully satisfies the one-stop procurement needs of global clients, precisely matching various distribution and oil-immersed transformers.
Our Service Processes
Our free service hotline:0317-3628666
Pre-sales Consultancy
1
>>
Confirmation of order
2
>>
Production
3
>>
Multi-Channel Shipping
4
>>
Confirmation of recei
5
>>
After-sale Services
6
FAQ
Q: What transformers is it used on?
A: It is mainly used on the high- and medium-voltage side of power transformers and oil-immersed transformers.
Q: What is the insulation material?
A: High-temperature sintered electrical porcelain, offering high dielectric strength, weather and contamination resistance.
Q: What information is needed for selection?
A: Transformer voltage class, rated current, installation conditions and relevant drawings.
Q: What tests are performed before delivery?
A: Routine tests including power frequency withstand, dielectric loss and leakage checks, with records available.
Q: When was your company established?
A: Hebei Anmei Electric Equipment Co., Ltd. was founded in 2014 and is a high-tech enterprise located in Hejian Economic Development Zone, Hebei Province.
Q: Where is your factory located?
A: Our factory is located in Hejian Economic Development Zone, Cangzhou, Hebei, China.
Q: Which well-known brands do you cooperate with?
A: As an excellent supplier of TBEA, our products are supplied to internationally renowned brands including Siemens and ABB, and exported to Asia, the Middle East, Europe and America.
Q: Do you support OEM/ODM?
A: Yes, we support sample customization, OEM and ODM services to match your branding and market strategy.
Hot Tags: discharge-gap type surge arrester bushing, China discharge-gap type surge arrester bushing manufacturers, suppliers, factory, transformer cable bushing, transformer current transfer bushing, transformer industrial insulation bushing, transformer insulated feedthrough
