AS Standard Bushing

AS Standard Bushing

An AS standard porcelain transformer bushing is not governed by a standalone Australian porcelain specification. The governing standard is AS/NZS 60137:2020, which adopts IEC 60137:2017 with national modifications for Australia and New Zealand. It applies to insulated bushings for transformers, switchgear and installations with highest voltage for equipment above 1,000 V and power frequencies from 15 Hz to 60 Hz. The standard’s lineage runs from AS C325—1959 through AS 1265 to the current joint AS/NZS edition, meaning an Australian standard transformer bushing is a product built against a standard that has been refined over six decades of local grid practice, not a generic IEC item with an AS label attached.
Send Inquiry
Description

Hebei Anmei Electrical Equipment Co., Ltd. is one of the most reliable manufacturers and suppliers of as standard bushing in China, also supports customized service. If you're going to buy high quality as standard bushing made in China, welcome to get quotation from our factory.

 

modular-1
 

The Australian Standard (AS) porcelain bushing is designed and manufactured in accordance with Australian standards for oil-immersed distribution transformers, featuring a high-grade sintered porcelain body for reliable insulation and mechanical strength. Dimensions, interfaces and tests comply with AS requirements, providing a stable and reliable bushing solution for Australia and other AS-standard markets.

 

 

AS Standard Bushing7

The insulation body of an AS standard porcelain bushing is high-density alumina porcelain, selected for dielectric strength, tracking resistance and long-term dimensional stability under outdoor exposure. The current path uses high-purity oxygen-free copper, and the sealing interface relies on silicone rubber sealing rings to hold oil-tightness at the flange and terminal connections. Structurally, the bushing is a solid-core porcelain insulator assembled with a conductive stud and a mounting flange - a configuration that has no organic housing to age under UV and no oil inside the insulation body itself. This is the material logic behind the porcelain transformer bushing category: the insulation function sits in a fired ceramic body whose properties do not change with service time the way polymer surfaces can.

The choice between an AS standard porcelain bushing and a composite bushing follows site conditions, not a blanket material hierarchy. Porcelain insulation is a proven technology offering low cost, long life and maintenance-free operation in static transformer installations, with antipollution levels from P1 to P4 available to match the site pollution severity.Composite housingsoffer flexibility and reduced weight, and are preferred where vandalism risk or high vibrationmakes porcelain fragmentation a concern. For a substation or pad-mounted transformer with normal mechanical protection and a correctly specified creepage profile, the porcelain route delivers the lowest total cost of ownership: no scheduled washing, no polymer surface aging to monitor, and a mechanical stiffness that composite housings do not match at identical dimensions. The composite vs porcelain decision for an Australian standard transformer bushing should be driven by the failure-mode priority at the specific site, not by a catalogue preference.

AS Bushing2

 

Technical Specifications

 

 

 

 

 

Parameter Specification
Standard Australian Standard (AS)
Rated Voltage 1-36 kV
Rated Current Selected per transformer capacity
Insulation Material High-grade sintered electrical porcelain
Conductor Material Copper
Mounting Transformer tank-cover mounting
Connection Type Multiple types available; terminal customizable per drawing
Creepage Distance Per voltage rating and environment; subject to spec sheet
Shed Profile Configured per AS requirement
Sealing Reliable oil-tight sealing
Routine Tests Withstand voltage, dielectric loss, leakage check, etc.

 

 

 

 

 

Application Fields

 

 

In terms of customer groups and applications, the core users of AS standard bushings are transformer manufacturers, power equipment integrators, and power system O&M units. Typical applications include single-phase oil-immersed distribution transformers, industrial power transformers, municipal grid equipment, mining power supply transformers, and backup power systems for large commercial buildings.

 

 

 

 

 

why choose us
 

A transformer bushing manufacturer serving the world with its own factory and consistent quality.

gongsitupian

Hebei Anmei Electric Equipment Co., Ltd.

 

Hebei Anmei Electric Equipment Co., Ltd. is a professional transformer bushing manufacturer with over 30 years of industry experience, located in Hejian City, Hebei Province, China. The company owns its own factory and focuses on the R&D, production, and sales of transformer bushings. Its products cover high-voltage (up to 40.5kV) and low-voltage series, with insulation types including porcelain, cast resin, and silicone rubber, and can be manufactured according to international standards such as DIN, ANSI, EN, AS, and ABNT.

 

These products are mainly used in oil-immersed distribution and power transformers. With strict quality control, all finished products undergo routine electrical tests. The company supports customized drawings, sample processing, and OEM/ODM cooperation, serving transformer manufacturers and power engineering customers in many countries and regions.

 

Precision Manufacturing for AS Standard Porcelain Bushings
 

Every AS standard porcelain bushing is backed by rigorous routine tests

Precision Machining & Conductor Fabrication

Equipped with advanced CNC machining centers, we fabricate the mounting flanges and high-purity oxygen-free copper conductors with micron-level precision. This ensures the AS standard porcelain bushing maintains a rigid and exact fit, providing a reliable foundation for the tank interface.

Company Factory600kb

2

Automated Sealing Assembly & Control

The production lines utilize automated control systems to precisely install silicone rubber sealing rings. By maintaining strict tension and alignment, we guarantee the porcelain transformer bushing delivers consistent oil-tightness before undergoing our strict 75°C thermal cycling tests.

Scalable Capacity for Bulk Distribution Projects

The spacious manufacturing floor supports large-scale, continuous production of the AS standard porcelain transformer bushing. With optimized logistics for heavy ceramic handling, we ensure stable supply continuity and fast lead times for your 1-36 kV transformer projects.

Workshop2
1

Customized Configuration & Interface Matching

Every Australian standard transformer bushing is assembled to match your specific requirements. Our technicians precisely configure flange drilling patterns, stem lengths, and terminal thread types, ensuring the AS standard bushing fits your equipment on the first installation attempt.

Strict Routine Testing & Quality Control

Our in-house laboratory conducts 100% partial discharge (PD) testing per AS/NZS 60137. We supply a combined test report package covering each production batch of high-density alumina porcelain bushings, providing verifiable evidence that the solid ceramic body and assembled interfaces are free of internal voids.

product-180-120
1

Thermal Verification & Mechanical Testing

The heavy-duty equipment ensures controlled 75°C / 6-hour oil-leakage testing and cantilever load withstand verification. This process guarantees that the AS standard porcelain bushing maintains mechanical stiffness and sealing integrity under extreme wind loads and thermal expansion.

 

 

 

 

our Advantages
 

 

Strict Standard Compliance & Testing

We build products to perform, not just to pass. Every AS standard porcelain bushing is manufactured and verified against AS/NZS 60137. Our in-house lab conducts 100% partial discharge (PD) testing, alongside strict 75°C / 6-hour oil-leakage verification, ensuring the solid ceramic body is free of internal voids before shipment.

True Customization from the Drawing Up

Off-the-shelf parts don't fit every tank. We specialize in producing custom porcelain transformer bushings for non-standard applications. Send us your tank flange drawing, and our engineering team will match the flange drilling pattern, stem length, and terminal thread precisely, ensuring a perfect fit on the first installation attempt.

Full-Chain In-House Manufacturing

From the processing of high-purity oxygen-free copper conductors and metal fittings, to ceramic molding, glazing, and final assembly with silicone rubber sealing rings, we control the entire production chain. This vertical integration eliminates third-party delays, guarantees material traceability, and ensures reliable lead times for bulk orders.

Material Science Expertise

The right materials define bushing lifespan. We utilize high-density alumina porcelain in our Australian standard transformer bushing series, selected for its superior dielectric strength, tracking resistance, and long-term dimensional stability. This material logic ensures the AS standard bushing performs reliably in static installations and harsh outdoor environments.

Battle-Tested Export Packaging & Logistics

High-voltage ceramic insulation components must survive transit. We use seaworthy plywood cases with custom internal bracing and shock absorption to protect the fragile porcelain sheds. Whether shipping heavy AS standard porcelain transformer bushings or long-stem units, our packaging guarantees they arrive at your port in flawless condition.

Engineer-to-Engineer Technical Support

You are not just buying a component; you are getting a technical partner. Our sales engineers understand creepage distance, BIL coordination, and site pollution severity. We assist with drawing approvals, pollution level mapping, and compliance documentation, ensuring your porcelain transformer bushing sourcing process is smooth and technically sound.

 

 

 

 

 

 

 

Our Certifications & Honors

 

product-736-552

 

 

Anmei is driven by technological innovation to upgrade product quality. We have fully passed four major international system certifications: ISO 9001 (Quality), ISO 14001 (Environment), ISO 45001 (Occupational Health & Safety), and ISO 50001 (Energy Management). Backed by profound R&D accumulation, we are recognized as a "National High-Tech Enterprise" and hold multiple national patents. Through rigorous quality control and innovative processes, we have repeatedly won "Excellent Supplier" and "Excellent Supply Chain Partner" awards from global leaders like TBEA, earning international trust through our solid capabilities.

 

 

 

 

 

 

 

 

Engineered Export Packaging:

Ensuring Zero-Damage Transit for AS Standard Porcelain Bushings

 

Internal Shock Absorption & Shed Protection

The fragile nature of high-density alumina porcelain demands strict internal bracing. Each porcelain transformer bushing is secured by custom-molded EPE foam and heavy-duty wooden supports that firmly lock the mounting flange in place. This design eliminates lateral movement and prevents the ceramic sheds from chipping or cracking during transit.

Seaworthy Crating & Weather Protection

For ocean freight, all AS standard porcelain bushings are packed in fumigation-free, seaworthy plywood cases with reinforced steel strapping. Each case is internally lined with heavy-duty moisture-barrier materials to protect the components from humid sea air. Whether loading a full container of standard Australian standard transformer bushings or a single customized unit, our packaging ensures they arrive at your port in flawless, installation-ready condition.

product-600-450

 

 

 

 

 

FAQ

 

 

Q: What is the difference between AS bushings and ANSI/DIN bushings?
A: AS bushings follow the Australian standard system in dimensions, flange interfaces and test requirements, so they are not interchangeable with ANSI or DIN bushings. Selection should be based on the Australian project drawings.

 

Q: What voltage ratings are available?
A:From low voltage up to 36kV, covering common Australian distribution levels such as 3kV, 12kV and 24kV.

 

Q: Is it suitable for Australia's hot and coastal environment?
A: Yes. The sintered porcelain body resists weathering and contamination, and the shed profile and creepage distance can be configured per environment, suiting Australia's outdoor high-temperature and coastal conditions.

 

Q:Do you provide AS drawings and parameter confirmation?
A: Yes. We provide technical drawings and confirm mounting interfaces and electrical parameters against them before production.

 

Q: What transformers are AS bushings used on?
A: They are mainly used on oil-immersed distribution transformers for Australian grid and distribution projects.

 

Q: What certifications do you have?
A: Our products are certified with ISO9001, ISO14001, and other relevant certifications. Test reports and compliance documents can be provided upon request.

 

https://www.anmeibushing.com/products

 

Hot Tags: as standard bushing, China as standard bushing manufacturers, suppliers, factory, transformer cable bushing, transformer current transfer bushing, transformer industrial insulation bushing, transformer insulated feedthrough

Send Inquiry